Which is a better option: replacing or repairing the autogate motor?
If your old autogate motor has started to have an issues, especially with a damaged autogate motor whether it is arm or dc type. Total repair costs might not be worth it depending on the situation. But do consider this: if today your autogate motor left side is broken, and tomorrow or the day after, the right side could break. Replacing individual parts one by one can end up being more expensive than installing a new autogate. So, think about what’s best for your autogate system and your money.
Symptoms of malfunction and what homeowners should be aware of when making the decision.
Symptoms of Malfunction:
- Slow Operation: The autogate moves slower than usual or gets stuck during opening and closing.
- Inconsistent Movement: The gate may not close or open fully, stopping mid-way or reversing direction unexpectedly.
- Strange Noises: Grinding, buzzing, or squeaking sounds from the motor indicate mechanical issues.
- Sensor Problems: The sensors fail to detect obstructions, leading to safety risks.
- Electrical Faults: The gate may not respond to remote control signals or fails to operate altogether due to wiring or electrical issues.
What Homeowners Should Be Aware of:
- Frequency of Repairs: If repairs are becoming frequent, it might be more cost-effective to replace the motor rather than continue with temporary fixes.
- Motor Age: Older motors often struggle to keep up with modern automation features and wear out faster.
- Safety Concerns: Faulty motors pose safety risks, particularly if sensors fail or the gate malfunctions unexpectedly.
- Long-Term Costs: Regular repairs can add up, sometimes making a full motor replacement the better financial choice in the long run.
The Dilemma: Repairing vs. Replacing Autogate Motors
When their autogate motor breaks down, homeowners often find themselves in a difficult situation: should they buy a new one or fix the current one? The issue usually results from a few common factors..
- Cost Considerations: Repairing an autogate motor is often seen as a more budget-friendly option, especially if the motor’s issues seem minor. However, ongoing repairs can add up over time, leading homeowners to question whether it’s more economical to replace the motor entirely and avoid future repair costs.
- Motor Age and Wear: As autogate systems age, their components experience wear and tear, leading to frequent breakdowns. In these cases, repairs might only offer a temporary fix, while replacement could provide a more long-term solution.
- Outdated Technology: Older autogate motors may not be compatible with the latest safety and automation features that modern homes demand. Homeowners are often faced with the decision to upgrade to a newer system that supports advanced functionalities like remote control, integration with smart home systems, and enhanced security features.
- Reliability and Safety: Constantly repairing an autogate motor can lead to frustrations over reliability. Homeowners may grow concerned about the motor’s safety, particularly if it malfunctions frequently. Replacing the motor with a newer, more reliable model can provide peace of mind and ensure the security of the property.
Cost Comparison: Repair vs. Replacement
| Factors | Repair | Replacement |
| Typical Cost in Malaysia | RM 300 – RM 800 | RM 1,500 – RM 3,500 |
| Upfront Cost | Low | High |
| Repair Frequency | Potential for frequent repairs | Low frequency of repairs after replacement |
| Long-Term Costs | Can add up over time due to ongoing repairs | Higher initial cost, but fewer repairs needed |
| Maintenance Expenses | Requires more frequent maintenance as it ages | Lower maintenance with newer technology |
| Energy Consumption | Higher due to older, less efficient motors | Lower with modern, energy-efficient motors |
| Lifespan | Shorter lifespan, frequent breakdowns | Longer lifespan with warranty coverage |
| Technology | Outdated, may lack modern features | Smart integration, green energy efficiency |
| Warranty | Limited or expired | New warranty included |
| Best For | Minor issues, newer motors (under 7 years old) | Older motors, frequent breakdowns, outdated models |
Have you replaced or fixed your autogate motor before?
Have you ever had to replace just one side of your autogate arm motor, or both sides at once? Did you stick with the same autogate model and brand, or did you opt for something different?
One of our dealer’s customer in Pulau Serai, Pekan, just recently experienced issues with their right-side autogate arm. This wasn’t the first time the problem had occurred. A couple of years ago, they had similar trouble and called the original installer who had set up their autogate. The installer managed to repair the arm motor, charging the customer over RM 400, but didn’t replace it with a new arm motor.
When the problem reappeared again, the customer decided not to contact the same installer. They searched for another service provider in the Pekan area and came across DNOR dealer. This time, the customer wanted a more durable solution, requesting that we use a heavier-duty autogate motor. We replaced the faulty arm motor with the DNOR Turbo 880 Autogate on the right side. The customer was very pleased with the upgrade and mentioned that if the left side encounters any problems in the future, they will rely on DNOR to replace it as well.
Not All Autogate Problems Require Replacement
Although changing an autogate motor can seem like a permanent solution, it’s not always the best course of action. You can save time and money by having your system fully functional again with a simple repair in many circumstances. Here’s how to decide if it’s preferable to repair instead of install new one:
When you should repair your autogate motor:
- Minor Issues: If your autogate motor is experiencing small issues such as slight noise, slower operation, or sensitivity adjustments, these can often be resolved through quick repairs rather than a full replacement.
- Recent Installation: If your autogate motor was installed less than 7 years ago and has only started showing minor signs of wear and tear, it’s likely more cost-effective to repair the motor and extend its lifespan.
- Sensor Problems: Issues with sensors, such as improper alignment or dirt accumulation, are usually easy to fix and don’t require a full motor replacement.
- Affordable Parts: If the replacement parts for your motor (such as a sensor or circuit board) are readily available and affordable, a repair can restore functionality without the need for a new system.
- Electrical Faults: Minor electrical faults, like faulty wiring or power surges, are often repairable without replacing the entire motor.
When to Replace Your Autogate Motor
Sometimes, the best solution for those who have been using autogate for more than 7 years is to replace your autogate motor with the new one, especially when repairs no longer give you peace of mind. Here are the signs that it’s time to consider replacing your autogate motor:
Signs a Replacement Is Needed
- Frequent Breakdowns: If your motor constantly needs repairs, it’s likely reaching the end of its lifespan. Repeated breakdowns become costly and frustrating.
- Outdated Technology: Older motors may lack modern features like smart home integration, remote control, or enhanced safety measures. Upgrading provides better functionality.
- Safety Concerns: Faulty motors pose risks like gate malfunctions, sensor failures, or electrical issues that can compromise your safety.
When Replacement Is the Better Option
- Cost Efficiency: If repairs have added up to nearly half the cost of a new motor, replacement becomes more financially sensible.
- Motor Age: Motors over 7 to 10 years old are prone to more frequent failures. Replacing them avoids constant maintenance and ensures reliable operation.
- Property Value: Installing a modern autogate motor can enhance the value of your property, especially if it includes smart features.
Long-Term Benefits of Replacement
- Energy Efficiency: New motors are more energy-efficient, lowering electricity bills over time.
- Warranty Protection: New motors come with warranties, reducing repair costs and providing peace of mind.
- Less Maintenance: Modern motors require fewer repairs and operate more smoothly.
- Improved Features: Enjoy enhanced security, remote access, and integration with smart home systems.
Need autogate installation to replace your old system?
If you are thinking to install a new autogate motor for your home, just quickly contact us as we can solve your autogate problems. We are offering the best autogate installation and repair services in KL, Puchong, Selangor, and Klang Valley. We also have our dealers in other state of Johor: Johor Bahru, Skudai, Kulai, Kluang, Batu Pahat, Muar, Tangkak, Pasir Gudang, Ulu Tiram, Segamat, Negeri Sembilan: Seremban, Senawang, Nilai, Port Dickson, Pahang: Kuantan, Gambang, Raub, Mentakab, Temerloh, Triang, Jerantut, Kedah: Kulim, Sungai Petani, Sabah: Kota Kinabalu, Tawau and Sarawak: Kuching, Miri, Bintulu, Sibu.
Here are some of the autogate motor model available in our services: autogate arm swing and folding model 212, 212K and 712, autogate arm motor, autogate motor turbo 880.
What’s so special about DNOR Turbo 880 Autogate System?
The DNOR Turbo 880 is a standout choice for its 7-in-1 autogate system, known for its reliability and advanced features. It’s designed to handle heavy-duty use while offering smooth and quiet operation. Explore more of what makes it special by viewing our video here: Turbo 880 Video.
Interested? Here’s what to do:
Interested? Here’s what to do:Explore our product models to find the perfect autogate system for your home or business. Take the first step towards enhanced security and convenience.
What are you waiting for? Call us at 03-8051 2132 for any autogate inquiries, or visit our website at https://www.dnor.com.my.
Ready to install a new autogate system or need a service? Contact DNOR today!
